Straining (fabric or micro)

From Akvopedia
Revision as of 00:05, 4 July 2012 by Winona (talk | contribs) (Construction, operations and maintenance)

Jump to: navigation, search
Image: 50 pixels This article is under development. You can help Akvopedia by expanding it.

Straining icon.png
A woman uses a sari cloth to strain water. Photo: CAWST.

Straining water through a cloth has been widely used for household water treatment in many cultures for centuries. A common sari cloth is usually used for this in South Asia, for example (photo on right). Straining through a fine cloth can take out guinea-worm, organic matter, and help clear up turbidity.

The pore size range in old (laundered) sari cloth is 100–150 μm, but about 20 μm if the cloth is folded four to eight times. The holes allow water to pass but retain particles and pathogens >20 μm. Straining through sari cloth has been shown to be effective in filtering out the plankton to which cholera bacteria may attach themselves, therefore reducing the risk of cholera. This simple method can also filter out many helminths and their eggs and larvae.

Old sari cloth made of cotton was found to be most effective in removing cholera based on laboratory experiments. After several launderings, threads of an old sari become soft and loose, reducing the pore size, compared with new sari cloth.

Suitable conditions

Cloth is available around the world, discarded cloth may be used.

Construction, operations and maintenance

Fold a large, clean piece of cloth seven to eight times. Place the folded cloth over a clean water container, and secure in place. Pour water through the cloth into the container. Wash the cloth in clean water before using it again.

Cloth may need to be replaced if there are holes.
Cloth needs to be washed in clean water after every use.

Reference manuals, videos, and links

Acknowledgements