Elevated storage tanks

From Akvopedia
Revision as of 05:13, 14 June 2012 by Winona (talk | contribs)

Jump to: navigation, search

Elevated tanks do not require the continuous operation of pumps. Short term pump shutdown does not affect water pressure in the distribution system since the pressure is maintained by gravity. And strategic location of the tank can equalize water pressures in the distribution system. However, precise water pressure can be difficult to manage in some elevated tanks.

The pressure of the water flowing out of an elevated tank depends on the depth of the water in the tank. A nearly empty tank probably will not provide enough pressure while a completely full tank may provide too much pressure. The optimal pressure is achieved at only one depth.

The optimal depth of water for the purpose of producing pressure is even more specific for standpipes than for tanks elevated on legs. The length of the standpipe causes continual and highly unequal pressures on the distribution system. In addition, a significant quantity of the water in a standpipe is required to produce the necessary water pressure. The water below a certain level is therefore used only as a support, unless booster pumps are available for emergency use of this water.


Elevated storage tanks
Deep well pump icon.png
Deep well pump icon.png
Deep well pump icon.png
Reinforced concrete reservoir small.jpg
Elevated steel reservoir small.jpg
250px-Commercial elevated tanks small.jpg


Elevated storage tanks link

Acknowledgements