[[Image:sump tank 2.jpg|thumb|right|200px|Source: [http://www.rainwaterharvesting.org/Urban/Components.htm rainwaterharvesting.org]]]
A sump is an underground (or partially underground) tank that is popular in India. It is usually used for large water tank storage and can be built cheaply using cement-like materials. It is usually part of a rainwater harvesting system, where the rainwater gets channeled into the tank, then pumped out for use.
===Suitable conditions===
{| border="1" cellpadding="5" cellspacing="0" alignwidth="center70%"
|-
! width="50%" style="background:#efefef;" | Advantages
===Construction, operation and maintenance===
[[Image:sump tank 3.jpg|thumb|right|200px|A 20,000 litre sump tank collects rainwater. Source: [http://rainwaterharvesting.wordpress.com/2011/06/21/hi-tech-vs-low-tech-in-the-water-sector/ Hi-Tech vs Low-tech in the rural drinking water sector]. June 21, 2011]]
[[Image:sump tank 4.png|thumb|right|200px|For those who have connected the rooftop to sumps, it is time to clean up the roof, pipes and filters and the sump itself and be ready to collect the bounty. Source: [http://www.indiawaterportal.org/news/preparing-monsoons-mazhapolima-way-kerala-simple-rooftop-rainwater-harvesting-and-aquifer Preparing for the monsoons the 'Mazhapolima' way in Kerala: Simple rooftop rainwater harvesting and aquifer recharge]]]
* The overflow pipe should be just below the tank / sump cover so that there is no ‘dead space’ and the tank can be used to its maximum capacity. The overflow pipe should divert the excess water away from the sump and the foundations of other buildings and structures. This water should be directed to gardens or into the storm water drain and should not create slushy areas. A reverse U bend should be installed at the end of the overflow pipe so that light and other impurities do not enter the tank.
* Sumps could have level indicators, so that the pumps don’t run dry. Level indicators can be as simple as a dip-stick or can be electronic. Dip-stick systems have the disadvantage of being a conduit for light and impurities to enter the storage tank
* '''How large should the sump be?''' Even a small storage system can generate large collection provided we use the rainwater every time it rains. In Bangalore for example, with it’s evenly spread rains, a 500 litre sump tank can generate 25,000 litres of rainwater in a year. An ideal size is 2000 litres of sump storage for 100 square metre of roof area. This is as per the building bye law for Bangalore. 6000 litres of storage for 100 square metre roof area should give you 70,000 litres of water in a well distributed rainfall year<ref> S.Vishwanath</ref>. * Cylindrical ferrocement or Reinforced Cement Concrete (RCC ) recommended as tank building material. Plastic or brick is not recommended. * A first rain separator is crucial to the collection of clean rainwater in sump tanks<ref> S.Vishwanath</ref>. [[Image: sump setup.png|thumb|none|500px|Source: unknown]]
===Bangalore example===
[[Image:RWH-children-with-the-rainwater-storage-sump.jpg|thumb|right|200px|Source: [http://www.thebetterindia.com/6570/the-honeycomb-effect-small-causes-small-changes-big-impact-part-1/#sthash.KEq2V0Xu.dpuf The Honeycomb Effect: Small Causes, Small Changes – Big Impact (Part1)]]]
In Bangalore, water will be purchased from private water tankers and stored to be used for construction. One estimate says there a million sumps in the city alone with an average capacity of 6000 litres. This means that the water storage capacity created is a staggering 6000 million litres. Remember that the city gets in about 1000 million litres every day. Added to the fact that there is about 1000 million litres stored in overhead tanks the water storage by the city far outstrips that created by the utility.
The ideal system in Bangalore is one where rainwater is stored in sumps and the surplus used for recharging borewells.
===Field experiences===
{|style="border: 2px solid #e0e0e0; width: 20%; text-align: justify; background-color: #e9f5fd;" cellpadding="2"
|- style="vertical-align: top"
|[[Image:akvorsr logo_lite.png|center|60px|link=http://akvo.org/products/rsr/]]
|- style="vertical-align: bottom"
|[[Image:RSR project 282 - sump tank.jpg |thumb|center|140px|<font size="2"><center>[http://rsr.akvo.org/project/282/ RSR Project 282]<br>Rainwater harvesting for Vijayapura schools</center></font>|link=http://rsr.akvo.org/project/282/]]
|}
<br>
===Costs===
A tanker load (in Bangalore) of 6000 litres costing about Rs 200/-. To store water during construction, sumps were built and these would also be 6000 litres so as to fill up a tanker load completely. Coincidentally this happened to be the exact optimal storage requirement for rainwater harvesting. This made it easier for implementation using the sump as storage<ref>[http://www.rainwaterclub.org/docs/Domestic_Rainwater_Harvesting.pdf Domestic Rainwater Harvesting, Some applications in Bangalore, India]</ref>.
===Manuals, videos and links===
===References===
<references/>
===Acknowledgements===
* [http://rainwaterharvesting.wordpress.com/2013/10/31/on-the-sump-tanks-of-bangalore/ On the sump tanks of Bangalore]. October 31, 2013.
* [http://www.schools.indiawaterportal.org/node/9?q=node/14 Chapter 6 - Storage Tank]. Schools.indiawaterportal.org.